If you just listen to background music, new shows, etc., you can use the cheap audio cables that come in the package with your audio components. But only if you are not too concerned about sound quality and what components you are hooking up to the cables. Usually you will invest about 5-7percent of the systems cost in your cables. This is usually adequate. Several types and many brands of audio cables can be found.
The true audiophile believes that only the best will do, and they will commit the dollars to obtain cables that are not only sturdier, but provide optimum performance of their audio system. You can spend hundreds of dollars for audio cables, audio interconnect and gold plated connectors, but to the audio elitist the price is worth it, not only for the sound quality, but also for bragging rights. Still to many of us, it is hard to justify the added expense for the improved sound quality.
Analog audio cables, audio video cables, audio speaker cable and digital cables are the four basic types of cables that can be used to transfer sound. These cables transfer the audio signal from point A to point B unaltered. You control the amount of Resistance, Inductance, and Capacitance thereby minimizing losses at audio frequencies.
To pass analogue line level audio signal between components, RCA connections like audio cables connectors are employed. RCA audio cables are joined in stereo couples, with a connection for the right channel and one for the right channel of audio. For line level analogue connections it is a good idea to employ cables which have low capacitance and properly shielded to avoid interferences and external noises from getting to mix to the signal.
Video Cables are possibly the most critical cables since the signals that pass through them are at very high frequencies. The higher it is, the more critical to have a proper impedance, proper shielding and good teminations that audio-video cables should provide. So, a video cable must be well shielded and must keep the proper typical impedances.
Audio Speaker cables are usually fairly thick, and have two conductors; they can be tipped with spade lugs, metal pins, banana plugs or just bare wire. One needs to ensure that there is the tightest connection of the cable to amp and loudspeaker to minimize contact resistance. One should always remember to keep the speaker cable runs as short as possible and not to loop excessive cables as this may slightly increase cable inductance.
Audio cables come in two different types and are usually a single cable. The first type is an optical cable; it transmits digital audio signals as pulses of light. The second form is coaxial cables look like standard analog cables, but what they do is transfer digital audio signals.
Although there are many types of audio cables, expensive ones are not necessary if listening to background music and radio broadcasts etc. The job of the cable is to pass the signal from source to output minimizing any interference. Paired RCA cables, preferably low in capacitance and resistance should be used for line level analog interconnects. audio video cables should have adequate shielding as a high frequency signal is used. audio speaker cable needs to be secured tightly to ensure low contact resistance. Special digital cables are available namely, coaxial and optical which transmit light pulses and digital signals respectively.